Author Topic: can't access internet after connecting to routed server  (Read 8143 times)

Offline robustheart

  • Newbie
  • *
  • Posts: 8
can't access internet after connecting to routed server
« on: May 23, 2014, 04:43:46 AM »
I used to access internet through 3g usb dongle service and boleh used to work fine with that. But few days back got wifi connection and since then not able to access internet through boleh.

My System configuration
Operating system: windows 8.1
internet access through : wifi
router: netgear dgnd3700

Problem: As soon as I connect to any routed server using bolehvpn the internet access gets blocked. Though at network sharing center it shows system is connected to internet.Ping test also confirms internet access. As soon as i disconnect from routed server internet access gets restored.I  tried to run the program as admin also turned off the firewall and antivirus but till now nothing has worked.

vpn log is given below and result of "route print" command that i ran on CMD is attached as a txt file. A quick fix to this problem is expected. .

VPN log

SUCCESS: download 16577 bytes user profile to local.

SUCCESS: download 923 bytes update information to local.

Version Server:  2.4.4

Version Current:  2.4.4

Checking installed tap driver...

ROOT\NET\0000                                               : TAP-Windows Adapter V9
1 matching device(s) found.

Use port 44358 as management port

Fri May 23 01:59:06 2014 OpenVPN 2.3.4 i686-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on May  4 2014
Fri May 23 01:59:06 2014 library versions: OpenSSL 1.0.1g 7 Apr 2014, LZO 2.05

Fri May 23 01:59:07 2014 Control Channel Authentication: using 'C:/Program Files/BolehVPN/cfg/OpenVPN/ta.key' as a OpenVPN static key file
Fri May 23 01:59:07 2014 UDPv4 link local: [undef]
Fri May 23 01:59:07 2014 UDPv4 link remote: [AF_INET]107.150.34.186:443

Fri May 23 01:59:17 2014 [UNDEF] Inactivity timeout (--ping-restart), restarting
Fri May 23 01:59:17 2014 SIGUSR1[soft,ping-restart] received, process restarting

Fri May 23 01:59:19 2014 UDPv4 link local: [undef]
Fri May 23 01:59:19 2014 UDPv4 link remote: [AF_INET]208.110.65.98:443

Fri May 23 01:59:25 2014 [server] Peer Connection Initiated with [AF_INET]208.110.65.98:443

Fri May 23 01:59:27 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Fri May 23 01:59:27 2014 open_tun, tt->ipv6=0
Fri May 23 01:59:27 2014 TAP-WIN32 device [bolveh] opened: \\.\Global\{9A2CB8F7-0B40-4D35-8A6B-DC114C36A9D0}.tap
Fri May 23 01:59:27 2014 Set TAP-Windows TUN subnet mode network/local/netmask = 172.16.0.0/172.16.0.11/255.255.255.0 [SUCCEEDED]
Fri May 23 01:59:27 2014 Notified TAP-Windows driver to set a DHCP IP/netmask of 172.16.0.11/255.255.255.0 on interface {9A2CB8F7-0B40-4D35-8A6B-DC114C36A9D0} [DHCP-serv: 172.16.0.254, lease-time: 31536000]
Fri May 23 01:59:27 2014 Successful ARP Flush on interface [12] {9A2CB8F7-0B40-4D35-8A6B-DC114C36A9D0}

Fri May 23 01:59:37 2014 env_block: add PATH=C:\Windows\System32;C:\WINDOWS;C:\WINDOWS\System32\Wbem

Fri May 23 01:59:37 2014 env_block: add PATH=C:\Windows\System32;C:\WINDOWS;C:\WINDOWS\System32\Wbem

Fri May 23 01:59:37 2014 env_block: add PATH=C:\Windows\System32;C:\WINDOWS;C:\WINDOWS\System32\Wbem

Fri May 23 01:59:37 2014 env_block: add PATH=C:\Windows\System32;C:\WINDOWS;C:\WINDOWS\System32\Wbem

Fri May 23 01:59:37 2014 Initialization Sequence Completed
« Last Edit: May 23, 2014, 10:06:30 AM by robustheart »

Offline Chris

  • BolehVPN Staff
  • Admiral
  • *****
  • Posts: 2200
  • Beneath a cobalt moon
Re: can't access internet after connecting to routed server
« Reply #1 on: May 23, 2014, 01:34:17 PM »
Try a quick reinstall of the BolehVPN client. Make sure you reboot after you uninstall. Also try using Google DNS, https://developers.google.com/speed/public-dns/docs/using

Offline robustheart

  • Newbie
  • *
  • Posts: 8
Re: can't access internet after connecting to routed server
« Reply #2 on: May 23, 2014, 08:21:13 PM »
The same has been tried as suggested through  zendesk support  but didn't work.

Offline Indingo

  • BolehVPN Subscriber
  • Boatswain
  • **
  • Posts: 85
Re: can't access internet after connecting to routed server
« Reply #3 on: May 24, 2014, 05:33:17 AM »
The same has been tried as suggested through  zendesk support  but didn't work.

Two things you could try, just to see what happens is try to connect to an XCloakRouted server to make sure OpenVPN is not being blocked in the router or at your ISP level some how. Also in the BolehVPN GUI you see where it says OpenVPN on the main window? Try changing that to L2TP and using that, again it may make a difference and that may be a good diagnostic tool. You may also want to look at windows firewall, you said you disabled your firewall but maybe windows default one is still on. You can also right click and properties the BolehVPN icon and "run as admin" again to see if that works as something may be blocking programs with lower privileges, out of curiosity what antivirus/firewall do you use?

Offline robustheart

  • Newbie
  • *
  • Posts: 8
Re: can't access internet after connecting to routed server
« Reply #4 on: May 24, 2014, 07:13:36 PM »
The problem didn't solve neither with xcloakrouted-all or l2tp configuration.
I am not using any third party firewall and windows firewall is turned off.
I have given admin right to both shortcut as well as main application of bolveh and also have tried to run in win7 compatibility mode but nothing worked. Right now I have no antivirus installed in my computer and as earlier said no third party firewall installed.
I have given openvpn a wide open highway but it can't find the gateway? ::)

Offline Indingo

  • BolehVPN Subscriber
  • Boatswain
  • **
  • Posts: 85
Re: can't access internet after connecting to routed server
« Reply #5 on: May 25, 2014, 10:17:14 AM »
The problem didn't solve neither with xcloakrouted-all or l2tp configuration.
I am not using any third party firewall and windows firewall is turned off.
I have given admin right to both shortcut as well as main application of bolveh and also have tried to run in win7 compatibility mode but nothing worked. Right now I have no antivirus installed in my computer and as earlier said no third party firewall installed.
I have given openvpn a wide open highway but it can't find the gateway? ::)

It sounds stupid, but have you tried unplugging the power on your router + modem, waiting 30 seconds and plugging them back in again, if its a DHCP issue your devices will get new IP's and maybe will fix the problem? If you have another computer/phone connected to your router you can try BolehVPN on there, if its still the same problem then its not just that particular computer.

Offline robustheart

  • Newbie
  • *
  • Posts: 8
Re: can't access internet after connecting to routed server
« Reply #6 on: May 25, 2014, 03:26:40 PM »
The problem appeared 10 days ago when I changed my mode of internet access from "usb dongle modem' to wi fi and also changed my os to windows 8 . I tried to fix the problem for couple of days but when things didn't work out  created a ticket at zendesk 5 days ago but still the problem has not been solved.

@ Indingo  yes i have switched off the modem several times but it didn't work.


Offline robustheart

  • Newbie
  • *
  • Posts: 8
Re: can't access internet after connecting to routed server
« Reply #7 on: May 25, 2014, 09:13:18 PM »
just was going through advanced feature setup of my router and found the vpn set up wizard and vpn policy configuration wizard.i have no clue regarding value to be filled in, if somebody can help it may fix the problem. Herewith I am attaching the screen shots








Offline Chris

  • BolehVPN Staff
  • Admiral
  • *****
  • Posts: 2200
  • Beneath a cobalt moon
Re: can't access internet after connecting to routed server
« Reply #8 on: May 25, 2014, 11:56:37 PM »
Unfortunately that doesn't look like it supports OpenVPN.

Offline robustheart

  • Newbie
  • *
  • Posts: 8
Re: can't access internet after connecting to routed server
« Reply #9 on: May 26, 2014, 12:13:28 AM »
my  router sucks. can u suggest some router which is openvpn friendly

Offline Chris

  • BolehVPN Staff
  • Admiral
  • *****
  • Posts: 2200
  • Beneath a cobalt moon
Re: can't access internet after connecting to routed server
« Reply #10 on: May 26, 2014, 01:06:25 AM »
We recommend the Asus-WRT Merlin Routers (RT-N66, AC66, AC56, AC68) if you'd like to purchase a new one. It's not compulsory or recommended, but if you're in the market for a replacement and want to get something OpenVPN capable, this line is pretty good. It also runs our custom firmware as well!

Offline Indingo

  • BolehVPN Subscriber
  • Boatswain
  • **
  • Posts: 85
Re: can't access internet after connecting to routed server
« Reply #11 on: May 26, 2014, 03:55:31 AM »
@robustheart

That's for VPN configuration inside your router, should not effect connecting to BolehVPN through the software, only thing that seems logical to be causing the issue is that for some reason the router does not like OpenVPN/Encrypted packets very much?

Offline robustheart

  • Newbie
  • *
  • Posts: 8
Re: can't access internet after connecting to routed server
« Reply #12 on: May 26, 2014, 11:30:24 AM »
true replaced my netgear dgnd 3700 router with my friend's linksys wag120n and boleh is working fine. i bought this router few days ago now time to get a new one damn >:(